Go Back   Rumski Forum > Studijska tehnika i instrumenti > Computer Hardware

Computer Hardware Razmenite iskustva o muzickim karticama i bilo kom drugom hardveru koji koristite uz PC, konfigurisanje i optimizacija kompjutera za DAW

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-10-2009, 12:55 PM   #6
diviner
Administrator
 
diviner's Avatar
 
Join Date: Jan 2003
Location: Novi Sad
Posts: 4,553
Default Re: Overclock-korak po korak!

Pozdrav Alkoholicar...Malo smo u guzvi pa nisam stigao da se javim ranije...

Ne moras da brines o temperaturi, ukoliko ona bude prevelika procesor ce sam ugasiti masinu.

Evo ti i nekih setovanja, detaljno, pa kreni odatle:

Quote:
MB Intelligent Tweaker->

Robust Graphics Booster -------------- : [Auto]
CPU Clock Ratio ---------------------- : 8
Fine CPU Clock Ratio ----------------- : [0.5]
CPU Frequency ---------------------: 3.82ghz

Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------------- : [Enabled]
CPU Host Frequency (Mhz) --------------: [450]
PCI Express Frequency (Mhz) ---------- : [100]
C.I.A.2 ------------------------------ : [Disabled]

Advanced Clock Control ------- [Press Enter]

DRAM Performance Control
Performance Enhance ------------------- : [standard]
(G)MCH Frequency Latch ---------------- : [400Mhz]
System Memory Multiplier -------------- : [2.00D]
Memory Frequency (Mhz) ---------------- : [900]
DRAM Timing Selectable ---------------- : [Auto]

Motherboard Voltage Control
CPU
Load Line Calibration - Enabled
CPU Vcore --------------- 1.125 ---- : [1.25]
CPU Termination --------- 1.200V* ----- : [Auto]
CPU PLL ----------------- 1.500V* ----- : [Auto]
CPU Reference ----------- 0.760V* ----- : [Auto]

MCH/ICH
MCH Core ---------------- 1.100V ------- : [1.20]
MCH Reference ----------- 0.760V ------- : [Auto]
MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
ICH I/O ----------------- 1.500V ------- : [Auto]
ICH Core ---------------- 1.100V ------- : [Auto]

DRAM
DRAM Voltage ------------ 1.800V ------- : [Auto]
DRAM Termination -------- 0.900V ------- : [Auto]
Channel A Reference ----- 0.900V ------- : [Auto]
Channel B Reference ----- 0.900V ------- : [Auto]


Advanced Settings->

Limit CPUID Max. to 3 ------------------ : [Disabled]
No-Execute Memory Protect -------------- : [Enabled]
CPU Enhanced Halt (C1E) ---------------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ------------ : [Disabled]
CPU EIST Function --------------------- : [Disabled]
Virtualization Technology -------------- : [Enabled]
Full Screen Logo Show -------------------[Disabled]
Ovo su ti setovanja u biosu za 3.8Ghz.... Ako se sve butuje kako treba, i udjes u win, pokreni neki od testova za provjeru stabilnosti kloka (prime95, ili jos bolje intelburntest).

Imas i dobra upustva za overklokovanje procesora na benchmark forumu, pa konsultuj i njega...
__________________
[rumski administrator team] [ruDAW]


diviner is offline   Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:28 PM.


Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vB.Sponsors